HP ML530 Implementing Novell NetWare 6.5 on ProLiant servers integration note - Page 26

Issue 13 Issue 14 Workaround Solution As a workaround until the updated System ROM is available, move the controller to a slot OTHER than Slot 3 of the PCI-Express Riser Cage. The CPU Hog Detected by Timer ABEND has been corrected in an updated version of the System ROM for the ProLiant DL380 G5 server. When this System ROM becomes available, this advisory will be updated: http://h20000.www2.hp.com/bizsupport/TechSupport/ Document.jsp?lang=en&cc=us&objectID=c00727551 . System Management Homepage Displays Information for Only One Port of an HP NC320m Dual Port PCI Express Gigabit Server Adapter Installed in an HP ProLiant BL20p G4 Server Blade Running Novell NetWare 6.5 SP5 Description HP System Management Homepage (SMH) displays information for only one port of an HP NC320m Dual Port PCI Express Gigabit Server Adapter installed in an HP ProLiant BL20p G4 server blade running Novell NetWare 6.5 SP5 when the operating system is installed using an HP SmartStart Release 7.51 Assisted Installation. This condition occurs because SmartStart Release 7.51 Assisted Installation does not use the Q57.LAN driver for the NC320m adapter because the PCI information for this adapter is not available in the Q57.LDI file. Instead, the B57.LAN driver is loaded and results in this behavior. Any HP ProLiant BL20p G4 server blade configured with an HP NC320m Dual Port PCI Express Gigabit Server Adapter and running Novell NetWare 6.5 SP5 installed using an HP SmartStart Release 7.51 Assisted Installation. Workaround To view NC320m adapter information using the System Management Homepage, use INETCFG and select the Q57.LAN driver to load for the NC320m adapter. Additional information on INETCFG is available at the following URL: www.novell.com/documentation/oes/index.html?page=/documentation/oes/utlr fenu/data/hnbvotqk.html#hnbvotqk Solution The SmartStart Release 7.51 Assisted Installation does not use the Q57.LAN driver for the NC320m adapter because PCI information is not available in the Q57.LDI file. Instead, the B57.LAN driver is loaded and results in this behavior. This condition will be corrected in a future release of SmartStart or ProLiant Support Pack. This advisory will be updated when additional information becomes available: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en &cc=us&objectID=c00711917. HP ProLiant ML310 G3 Server with Integrated Lights-Out 2 (iLO 2) That Is Booting or Installing NetWare 6.5 May ABEND with CIOS Error Message Description An HP ProLiant ML310 G3 server that is either booting or installing NetWare 6.5 with SP4 (or earlier) and Integrated Lights-Out 2 (iLO 2) firmware version 1.00 may ABEND with the following error message, which references the NetWare Consolidated Input / Output Subsystem (CIOS): P01: CIOS Invalid or corrupted memory returned to PlatFree This occurs because the USB driver in NetWare 6.5 SP4 (or earlier) does not support iLO 2. Any HP ProLiant ML310 G3 server that is either booting or installing NetWare 6.5 with SP4 (or earlier) and Integrated Lights-Out 2 (iLO 2) firmware version 1.00. 26