HP Microportable Projector MP1800 MP1800 Microportable Projector - Page 54
Standby, WARNING, the lamp cover while the projector is operating or
View all HP Microportable Projector MP1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Follow these steps to replace the projector lamp module: 1. Turn off the power to the projector by pressing the Standby button . 2. Allow the projector to cool down for at least 30 minutes. ! WARNING: The lamp assembly operates at a very high temperature. To reduce the risk of personal injury, allow the projector to cool down for at least 30 minutes before opening the lamp cover. Never open the lamp cover while the projector is operating or when the lamp is hot. 3. Turn off the main power switch . 4. Disconnect the power cord . 5-4 Care and Maintenance
5-4
Care and Maintenance
Follow these steps to replace the projector lamp module:
1.
Turn off the power to the projector by pressing the
Standby
button
➊
.
2.
Allow the projector to cool down for at least 30 minutes.
!
WARNING:
The lamp assembly operates at a very
high temperature. To reduce the risk of personal
injury, allow the projector to cool down for at least 30
minutes before opening the lamp cover. Never open
the lamp cover while the projector is operating or
when the lamp is hot.
3.
Turn off the main power switch
➋
.
4.
Disconnect the power cord
➌
.