HP Microportable Projector MP1800 MP1800 Microportable Projector - Page 55
WARNING, IMPORTANT, After replacing the lamp module, remember to reset - bulb
View all HP Microportable Projector MP1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5. Use the provided Phillips screwdriver to remove the screw from the lamp cover. 6. Remove the cover . 7. On the left side of the lamp module, push the electrical connector up to disengage it from the projector base. 8. Remove the three screws from the lamp module. 9. Pull out the lamp module . ! WARNING: To reduce the risk of personal injury, do not drop the lamp module or touch the glass bulb. The glass may shatter and cause an injury if it is dropped. Reverse the previous steps to replace the lamp module. ✎ After replacing the lamp module, remember to reset the lamp hours in the on-screen menu. IMPORTANT: The lamp contains < 0.125 percent mercury by weight. If the projection lamp breaks, the mercury may be released into the atmosphere. Please follow applicable federal, state, and local regulations for disposal and/or recycling. Care and Maintenance 5-5