HP Microportable Projector MP2810 Compaq MP2800 Microportable Projector - Page 13
Connecting the Projector to Other Video Sources, Powering On the Projector
View all HP Microportable Projector MP2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting the Projector to Other Video Sources The optional Compaq Multimedia Adapter must be used to connect the projector to a camcorder, DVD player, or videocassette recorder. This adapter converts signals from the camcorder, DVD player, or videocassette recorder for compatibility with the projector. Refer to Chapter 3, "Using the Compaq Multimedia Adapter," for information on attaching and using the Compaq Multimedia Adapter. Powering On the Projector Follow these instructions to power on the projector: 1. Make sure the computer and projector power cords and the signal cable are securely connected. ✎ Make sure the projector is perpendicular to the projection screen. 2. Remove the lens cap by squeezing the tabs and pulling the lens cap straight out . 3. Press the blue Standby button on the top of the projector and allow the projector to warm up for one to two minutes. When the projector has warmed up, the Compaq startup screen displays and the LED on the Standby button turns green. Getting Started 13