HP Microportable Projector MP2810 Compaq MP2800 Microportable Projector - Page 16
Adjusting the Projected Image
View all HP Microportable Projector MP2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Adjusting the Projected Image There are three ways to adjust the projected image: Adjusting the projector height Adjusting the projector focus Adjusting the projector zoom Adjusting the Projector Height The projector has a built-in elevator foot that can raise the projector approximately 1 inch (2.54 cm). To adjust the height: 1. Ensure the foot is turned 90° to balance the projector. 2. Raise the projector to the desired display angle, then press the elevator button to release the elevator foot . Getting Started 16
Getting Started
16
Adjusting the Projected Image
There are three ways to adjust the projected image:
n
Adjusting the projector height
n
Adjusting the projector focus
n
Adjusting the projector zoom
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the projector
approximately 1 inch (2.54 cm). To adjust the height:
1.
Ensure the foot is turned 90³ to balance the projector.
2.
Raise the projector to the desired display angle, then press the
elevator button
➊
to release the elevator foot
➋
.