HP Microportable Projector MP2810 Compaq MP2800 Microportable Projector - Page 9

Connecting the Projector to a Portable Computer, on the projector first, then turn on the computer.

Get HP Microportable Projector MP2810 PDF manuals and user guides View all HP Microportable Projector MP2810 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Connecting the Projector to a Portable Computer 1. Rotate the elevator foot to balance the projector. 2. Connect one end of the projector signal cable to the projector and the other end to the VGA connector B or the DVI connector A on the portable computer and tighten the screws. ✎ Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector. 3. Connect one end of the power cord into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. The projector will automatically be placed into Standby mode. 4. Press the blue Standby button on the top of the projector to turn on the projector first, then turn on the computer. ✎ For security purposes, this projector has been fitted with a security lock slot (located on the left, front side) for use with a security cable lock that can be purchased separately at most computer stores. Getting Started 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Getting Started
9
Connecting the Projector to a Portable Computer
1.
Rotate the elevator foot to balance the projector.
2.
Connect one end of the projector signal cable to the projector
and the other end to the VGA connector
➊
B
or the DVI
connector
➊
A
on the portable computer and tighten the screws.
✎
Be sure the signal cable aligns with the connector. Do
not force the cable onto the connector or you may
damage the signal cable or the projector.
3.
Connect one end of the power cord
➋
into the back of the
projector, and the other end to an electrical outlet that is easily
accessible and close to the projector. The projector will
automatically be placed into Standby mode.
4.
Press the blue Standby button on the top of the projector to turn
on the projector first, then turn on the computer.
✎
For security purposes, this projector has been fitted with a
security lock slot
➌
(located on the left, front side) for use
with a security cable lock that can be purchased separately
at most computer stores.