HP Mini 1000 HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guide - Page 46

Memory module, the HP Mini 1000 and the Compaq Mini 700. - power adapter

Get HP Mini 1000 - PC PDF manuals and user guides View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Memory module Description 512-MB (PC2-4200, 533-MHz, DDR2) 1024-MB (PC2-4200, 533-MHz, DDR2) 2048-MB (PC2-4200, 533-MHz, DDR2) (HP Mini 1000 only) Spare part number 504599-001 504600-001 517577-001 Before removing the memory module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 37). Remove the memory module: 1. Slide the right battery release latch to the inside or "unlocked" position to reveal the release latch for the memory module compartment cover. Use a thin, narrow tool to slide the release latch to the outside or "unlocked" position (1). (The edge of the cover rises away from the device.) 2. Remove the cover (2). The memory module compartment cover is included in the Plastics Kit, spare part number 512192-001 for the red-colored HP Mini 1000 or 507317-001 for all other models of the HP Mini 1000 and the Compaq Mini 700. 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the device.) 38 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
Memory module
Description
Spare part number
512-MB (PC2-4200, 533-MHz, DDR2)
504599-001
1024-MB (PC2-4200, 533-MHz, DDR2)
504600-001
2048-MB (PC2-4200, 533-MHz, DDR2) (HP Mini 1000 only)
517577-001
Before removing the memory module, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
37
).
Remove the memory module:
1.
Slide the right battery release latch to the inside or “unlocked” position to reveal the release latch
for the memory module compartment cover. Use a thin, narrow tool to slide the release latch to the
outside or “unlocked” position
(1)
. (The edge of the cover rises away from the device.)
2.
Remove the cover
(2)
. The memory module compartment cover is included in the Plastics Kit, spare
part number 512192-001 for the red-colored HP Mini 1000 or 507317-001 for all other models of
the HP Mini 1000 and the Compaq Mini 700.
3.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the device.)
38
Chapter 4
Removal and replacement procedures