HP Mini 1000 HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guide - Page 62

System board, WWAN module, if included see

Get HP Mini 1000 - PC PDF manuals and user guides View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

System board NOTE: The system board spare part kit includes a processor and replacement thermal material. Description System board equipped with 1.6-GHz processor Spare part number 504592-001 Before removing the system board, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 42) c. Top cover (see Top cover on page 45) When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 48) ● WWAN module, if included (see WWAN module on page 50) ● RTC battery (see RTC battery on page 52) ● Bluetooth module (see Bluetooth module on page 53) ● Heat sink assembly (see Heat sink assembly on page 57) Remove the system board: 1. Disconnect the wireless antenna cables from the terminals on the WLAN module (see WLAN module on page 48). 2. If the device also includes a WWAN module, disconnect the wireless antenna cables from the terminals on the WWAN module (see WWAN module on page 50). 54 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
System board
NOTE:
The system board spare part kit includes a processor and replacement thermal material.
Description
Spare part number
System board equipped with 1.6-GHz processor
504592-001
Before removing the system board, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
37
).
5.
Remove the following components:
a.
Keyboard (see
Keyboard
on page
40
)
b.
Hard drive or solid-state drive (see
Mass storage devices
on page
42
)
c.
Top cover (see
Top cover
on page
45
)
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
WLAN module (see
WLAN module
on page
48
)
●
WWAN module, if included (see
WWAN module
on page
50
)
●
RTC battery (see
RTC battery
on page
52
)
●
Bluetooth module (see
Bluetooth module
on page
53
)
●
Heat sink assembly (see
Heat sink assembly
on page
57
)
Remove the system board:
1.
Disconnect the wireless antenna cables from the terminals on the WLAN module (see
WLAN
module
on page
48
).
2.
If the device also includes a WWAN module, disconnect the wireless antenna cables from the
terminals on the WWAN module (see
WWAN module
on page
50
).
54
Chapter 4
Removal and replacement procedures