HP Mini 1000 HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guide - Page 73

Flex the inside edges of the bottom, If it is necessary to replace the display bezel

Get HP Mini 1000 - PC PDF manuals and user guides View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

c. Remove the speaker assembly (2). The speaker assembly is available as spare part number 506335-001. 4. If it is necessary to replace the display hinges, perform the following steps: a. Remove the two Phillips PM2.0×4.5 screws (1) that secure each hinge to the display enclosure. b. Remove the hinges (2). The hinges are available in the Display Hinge Kit, spare part number 504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels (Compaq Mini 700 only). 5. If it is necessary to replace the display bezel, perform the following steps: a. Flex the inside edges of the bottom (1), left and right sides (2), and the top (3) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
c.
Remove the speaker assembly
(2)
. The speaker assembly is available as spare part number
506335-001.
4.
If it is necessary to replace the display hinges, perform the following steps:
a.
Remove the two Phillips PM2.0×4.5 screws
(1)
that secure each hinge to the display
enclosure.
b.
Remove the hinges
(2)
. The hinges are available in the Display Hinge Kit, spare part number
504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels (Compaq Mini 700
only).
5.
If it is necessary to replace the display bezel, perform the following steps:
a.
Flex the inside edges of the bottom
(1)
, left and right sides
(2),
and the top
(3)
of the display
bezel until the bezel disengages from the display enclosure.
Component replacement procedures
65