HP Mini 1000 HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guide - Page 63
Remove the actuators, that secure the actuators for the power switch
View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3. Disconnect the following cables from the system board: (1) Speaker cables (2) Microphone cable (3) Fan cable (4) Power cable (5) Display panel cable 4. Remove the two Phillips PM1.6×2.5 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board. 5. Remove the actuators (2). NOTE: The actuators are included in the Bracket Kit, spare part number 507318-001. 6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the USB connector bracket to the base enclosure. Component replacement procedures 55
3.
Disconnect the following cables from the system board:
(1)
Speaker cables
(2)
Microphone cable
(3)
Fan cable
(4)
Power cable
(5)
Display panel cable
4.
Remove the two Phillips PM1.6×2.5 screws
(1)
that secure the actuators for the power switch and
wireless on/off switch to the system board.
5.
Remove the actuators
(2)
.
NOTE:
The actuators are included in the Bracket Kit, spare part number 507318-001.
6.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the USB connector bracket to the base
enclosure.
Component replacement procedures
55