HP Mini 110-4100ca HP Mini 200 - Maintenance and Service Guide - Page 49
Memory module, Spread the retaining tabs
View all HP Mini 110-4100ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Memory module Description 2-GB memory module (PC3, 12800, 1600-MHz) 2-GB memory module (PC3, 10600, 1333-MHz) Spare part number 652972-001 621565-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the service cover (see WLAN module on page 36). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 2. Remove the memory module (2) by pulling it away from the slot at an angle. Reverse this procedure to install the memory module. Component replacement procedures 41