HP Mini 110-4100ca HP Mini 200 - Maintenance and Service Guide - Page 66

Fan, System board see

Get HP Mini 110-4100ca PDF manuals and user guides View all HP Mini 110-4100ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Fan Description Fan Spare part number 651897-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34), and then remove the following components: ● Service cover (see WLAN module on page 36) ● Keyboard (see Keyboard on page 45) ● Top cover (see Top cover on page 48) ● System board (see System board on page 55) Remove the fan: 1. Turn the system board upside down, with the rear toward you. 2. Disconnect the fan cable (1) from the system board. 3. Remove the Phillips PM2.0×4.6 screw (2) that secures the fan to the system board. 4. Disengage the tab (3) on the fan from the slot on the system board. 58 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Fan
Description
Spare part number
Fan
651897-001
NOTE:
To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of
the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature
sensor and is designed to turn on automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
34
), and then remove the following components:
●
Service cover (see
WLAN module
on page
36
)
●
Keyboard (see
Keyboard
on page
45
)
●
Top cover (see
Top cover
on page
48
)
●
System board (see
System board
on page
55
)
Remove the fan:
1.
Turn the system board upside down, with the rear toward you.
2.
Disconnect the fan cable
(1)
from the system board.
3.
Remove the Phillips PM2.0×4.6 screw
(2)
that secures the fan to the system board.
4.
Disengage the tab
(3)
on the fan from the slot on the system board.
58
Chapter 4
Removal and replacement procedures