HP Mini 110-4100ca HP Mini 200 - Maintenance and Service Guide - Page 58
that fits on the right side has an L-shaped, alignment notch. When installing the rubber feet
View all HP Mini 110-4100ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
5. Remove the seven Phillips PM2.0×5.0 screws (2) that secure the top cover and the corner covers to the base enclosure. NOTE: The rubber feet are notched differently. The rubber foot (1) that fits on the left side has a rectangular alignment notch. The rubber foot (2) that fits on the right side has an "L"-shaped alignment notch. When installing the rubber feet, align them according to the side of the computer on which they should be installed. 50 Chapter 4 Removal and replacement procedures
5.
Remove the seven Phillips PM2.0Ć5.0 screws
(2)
that secure the top cover and the corner covers
to the base enclosure.
NOTE:
The rubber feet are notched differently. The rubber foot
(1)
that fits on the left side has a
rectangular alignment notch. The rubber foot
(2)
that fits on the right side has an āLā-shaped
alignment notch. When installing the rubber feet, align them according to the side of the computer
on which they should be installed.
50
Chapter 4
Removal and replacement procedures