HP Mini 110-4100ca HP Mini 200 - Maintenance and Service Guide - Page 68

Heat sink, Keyboard see

Get HP Mini 110-4100ca PDF manuals and user guides View all HP Mini 110-4100ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Heat sink Description Heat sink (includes replacement thermal material) Spare part number 651898-001 Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34), and then remove the following components: ● Service cover (see WLAN module on page 36) ● Keyboard (see Keyboard on page 45) ● Top cover (see Top cover on page 48) ● System board (see System board on page 55) ● Fan (see Fan on page 58) Remove the heat sink: 1. Remove the two Phillips PM2.0×4.6 screws (1) that secure the heat sink to the system board. 60 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Heat sink
Description
Spare part number
Heat sink (includes replacement thermal material)
651898-001
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
34
), and then remove the following components:
●
Service cover (see
WLAN module
on page
36
)
●
Keyboard (see
Keyboard
on page
45
)
●
Top cover (see
Top cover
on page
48
)
●
System board (see
System board
on page
55
)
●
Fan (see
Fan
on page
58
)
Remove the heat sink:
1.
Remove the two Phillips PM2.0×4.6 screws
(1)
that secure the heat sink to the system board.
60
Chapter 4
Removal and replacement procedures