HP Model 712/100 hp 9000 series 700 model 712 technical reference manual (a261 - Page 24
Video, RS-232, Table 2-3. RS-232 Technical Information, Connector Type
View all HP Model 712/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Video A proprietary graphics controller chip is the basis for system board graphics. The Graphics ASIC outputs the standard HP workstation video signal. This signal consists of three analog channels of color Red, Green, and Blue. The analog output of each channel conforms to the RS343A specifications when driving a doubly terminated 75 Ohm line. Video cable length should not exceed 30 feet, due to signal degradation. The system provides HPs' Color Recovery. The graphics subsystem supports the following: H 1024 by 768 by 8 bit color at 60 Hz to 75 Hz. H 1280 by 1024 by 8 bit color at 60 Hz to 72 Hz (with optional VRAM Card). H 15 pin VGA style connection. H NGLE compatible. H Support of the following VESA timings: 1280 by 1024 at 75 Hz. 1024 by 768 at 75 Hz. 800 by 600 at 75 Hz. 640 by 480 at 75 Hz. RS-232 The RS-232 port is full modem control with RTS hardware flow control. The port is implemented using a 9-pin male D-sub connector. Some devices which are supported on RS-232C include modems, plotters, printers, terminals, digitizers, and other input devices. Table 2-3 lists technical information for the RS-232 interface. Table 2-3. RS-232 Technical Information Function Type: Baud rate: Word size: Parity Device Type: Connector Type: Data RS-232C 50 to 454k Up to 227k input w/handshaking 5 to 8 bits Odd, even, one, zero, none 1 per interface connector 9-pin male D-sub connector 2-4 System Board Model 712 Technical Reference