HP NV517UT Maintenance & Service Guide: Compaq 500B and 505B Minitower Bus - Page 25
seats properly in the expansion card slot.
UPC - 884962596715
View all HP NV517UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
13. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis. Press the card straight down into the expansion socket on the system board. Figure 2-20 Installing an expansion card NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. 14. If you are replacing a graphics card, verify that the latch in the computer snaps back into place. Figure 2-21 Replacing a graphics card Expansion Cards 17
13.
To install a new expansion card, hold the card just above the expansion socket on the system
board then move the card toward the rear of the chassis so that the bottom of the bracket on the
card slides into the small slot on the chassis. Press the card straight down into the expansion socket
on the system board.
Figure 2-20
Installing an expansion card
NOTE:
When installing an expansion card, press firmly on the card so that the whole connector
seats properly in the expansion card slot.
14.
If you are replacing a graphics card, verify that the latch in the computer snaps back into place.
Figure 2-21
Replacing a graphics card
Expansion Cards
17