HP OMEN 15-dh0000 Maintenance and Service Guide - Page 44
Solid-state drive and Optane memory module, Remove the Phillips M2.0 × 4.0 screw
![]() |
View all HP OMEN 15-dh0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Solid-state drive and Optane memory module Table 5-2 Solid-state drive and Optane memory module descriptions and part numbers Description 1 TB, PCIe, Gen 3 × 4 512 GB, PCIe, Gen 3 × 4 512 GB, PCIe + 32 GB Optane memory 256 GB, PCIe, Gen 3 × 4 128 GB, PCIe, Gen 3 × 2 16 GB, PCIe, Gen 3 × 2 Optane memory module Spare part number L57387-001 L57351-001 L57352-001 L57350-001 L57349-001 L57348-001 Before removing the solid-state drive or Optane memory module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Disconnect the battery cable from the system board (see Battery on page 39). Remove the solid-state drive or Optane memory module: ▲ Remove the Phillips M2.0 × 4.0 screw (1), lift the metal cover off the drive (2), and then pull the drive from the socket (3). Reverse this procedure to install the solid-state drive or Optane memory module. 34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
![](/manual_guide/products/hewlettpackard-omen-15dh0000-maintenance-service-guide-d9e00c3/44.png)