HP OMEN 15-dh0000 Maintenance and Service Guide - Page 63

Thermal sensor, Remove the protective tape from the board

Get HP OMEN 15-dh0000 PDF manuals and user guides View all HP OMEN 15-dh0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Thermal sensor NOTE: The thermal sensor spare part kit does not include the cable. The cable is available as spare part number L57340-001. Table 6-10 Thermal sensor description and part number Description Spare part number Thermal sensor L57318-001 Before removing the thermal sensor, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 39). 4. Remove the solid-state drive (see Solid-state drive and Optane memory module on page 34). 5. Remove the fan/heat sink (see Heat sink/fan assembly on page 46). 6. Remove the system board (see System board on page 50). Remove the thermal sensor: 1. Remove the protective tape from the board (1). 2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the sensor to the computer. 3. Remove the thermal sensor from the computer (3). Reverse this procedure to install the thermal sensor. Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Thermal sensor
NOTE:
The thermal sensor spare part kit does not include the cable. The cable is available as spare part
number L57340-001.
Table 6-10
Thermal sensor description and part number
Description
Spare part number
Thermal sensor
L57318-001
Before removing the thermal sensor, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (see
Bottom cover
on page
32
).
3.
Remove the battery (see
Battery
on page
39
).
4.
Remove the solid-state drive (see
Solid-state drive and Optane memory module
on page
34
).
5.
Remove the fan/heat sink (see
Heat sink/fan assembly
on page
46
).
6.
Remove the system board (see
System board
on page
50
).
Remove the thermal sensor:
1.
Remove the protective tape from the board
(1)
.
2.
Remove the Phillips M2.0 × 3.0 screw
(2)
that secures the sensor to the computer.
3.
Remove the thermal sensor from the computer
(3)
.
Reverse this procedure to install the thermal sensor.
Component replacement procedures
53