HP OMEN 15-dh0000 Maintenance and Service Guide - Page 47

Hard drive assembly, and then disconnect the hard drive cable

Get HP OMEN 15-dh0000 PDF manuals and user guides View all HP OMEN 15-dh0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Hard drive assembly Table 5-4 Hard drive and connector descriptions and part numbers Description Hard drive, 2 TB, 5400 rpm Hard drive, 1 TB, 7200 rpm Hard drive connector/cable Spare part number 912487-850 L06427-850 L57337-001 Before removing the hard drive assembly, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Disconnect the battery cable from the system board (see Battery on page 39). Remove the hard drive assembly: 1. Lift the latch on the system board ZIF connector (1), and then disconnect the hard drive cable (2). 2. Remove the four Phillips M2.0 × 3.0 screws (3) that secure the hard drive assembly to the computer. 3. Lift the hard drive assembly out of the computer (4). Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Hard drive assembly
Table 5-4
Hard drive and connector descriptions and part numbers
Description
Spare part number
Hard drive, 2 TB, 5400 rpm
912487-850
Hard drive, 1 TB, 7200 rpm
L06427-850
Hard drive connector/cable
L57337-001
Before removing the hard drive assembly, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (see
Bottom cover
on page
32
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
39
).
Remove the hard drive assembly:
1.
Lift the latch on the system board ZIF connector
(1)
, and then disconnect the hard drive cable
(2)
.
2.
Remove the four Phillips M2.0 × 3.0 screws
(3)
that secure the hard drive assembly to the computer.
3.
Lift the hard drive assembly out of the computer
(4)
.
Component replacement procedures
37