HP OMEN 15-dh0000 Maintenance and Service Guide - Page 49
Removal and replacement procedures for authorized service provider parts, Component replacement
View all HP OMEN 15-dh0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
6 Removal and replacement procedures for authorized service provider parts IMPORTANT: Components described in this chapter should be accessed only by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures There are as many as 48 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Battery Table 6-1 Battery description and part number Description Battery, 6 cell, 69 Wh (includes thermal pad) Battery, 3 cell, 52 Wh (includes battery rubber) Spare part number L48497-006 L48495-006 Before removing the battery, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Remove the four Phillips M2.0 × 4.0 screws (2) that secure the battery to the computer. Component replacement procedures 39