HP OMEN 15-dh0000 Maintenance and Service Guide - Page 45

Memory module, CAUTION, IMPORTANT

Page 45 highlights

Memory module Table 5-3 Memory descriptions and part numbers Description Memory module, 16 GB Memory module, 8 GB Memory module, 4 GB Spare part number 937438-850 937236-850 L10598-850 Before removing the memory modules, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Disconnect the battery cable from the system board (see Battery on page 39). Remove the memory modules: 1. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle. 2. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same procedure to remove both memory modules. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. Install the memory modules: Use the following illustration to determine primary (1) and secondary (2) memory module locations. IMPORTANT: Do not completely remove the protective sheet from the primary memory module. Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89

Memory module
Table 5-3
Memory descriptions and part numbers
Description
Spare part number
Memory module, 16 GB
937438-850
Memory module, 8 GB
937236-850
Memory module, 4 GB
L10598-850
Before removing the memory modules, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (see
Bottom cover
on page
32
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
39
).
Remove the memory modules:
1.
Spread the two retention clips outward
(1)
until the memory module tilts up at a 45° angle.
2.
Grasp the edge of the memory module
(2)
, and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges only. Do
not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Install the memory modules:
Use the following illustration to determine primary
(1)
and secondary
(2)
memory module locations.
IMPORTANT:
Do not completely remove the protective sheet from the primary memory module.
Component replacement procedures
35