HP OMEN 15-dh0000 Maintenance and Service Guide - Page 59
Card reader/USB board, Disconnect the cable from the ZIF connector on the card reader/USB board
![]() |
View all HP OMEN 15-dh0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Card reader/USB board NOTE: The card reader/USB board spare part kit does not include the cable. The cable is available as spare part number L57338-001. Table 6-7 Card reader/USB board description and part number Description Spare part number Card reader/USB board L57317-001 Before removing the card reader/USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 39). 4. Remove the fan/heat sink (see Heat sink/fan assembly on page 46). Remove the card reader board: 1. Disconnect the cable from the ZIF connector on the card reader/USB board (1). 2. Remove the Phillips M2.0 × 3.5 screw (2) that secures the board to the computer. 3. Lift the side of the board up (3), and then pull the board up and into the computer to remove it (4). Reverse this procedure to install the card reader/USB board. Component replacement procedures 49
![](/manual_guide/products/hewlettpackard-omen-15dh0000-maintenance-service-guide-d9e00c3/59.png)