HP OMEN 17-w000 Maintenance & Service Guide: Models with GeForce GTX 1050/ - Page 51
Hard drive, Optical drive see
![]() |
View all HP OMEN 17-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hard drive Description Hard drive ● 1 TB 5400 RPM SATA RAW HYBRID 8 GB ● 2 TB 5400 RPM SATA RAW 9.5 mm ● 1 TB 7200 RPM SATA RAW 9.5 mm Hard drive connector and cable Spare part number 731999-005 801808-005 766644-005 857462-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Battery (see Battery on page 34) b. Optical drive (see Optical drive on page 35) c. Base enclosure (see Base enclosure on page 37) Remove the hard drive: NOTE: Use minimal force when lifting the locking bar up on the ZIF connector and disconnecting the cable. 1. Open the zero insertion force (ZIF) connector to release the hard drive cable (1) from the system board. Component replacement procedures 39
![](/manual_guide/products/hewlettpackard-omen-17w000-maintenance-service-guide-models-geforce-gtx-10501050-ti-graphics-cards-b3c9f1a/51.png)