HP OMEN 17-w000 Maintenance & Service Guide: Models with GeForce GTX 1050/ - Page 54
SSD (M.2), Remove the SSD
View all HP OMEN 17-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
SSD (M.2) Description M.2 SATA SSD, PCIe NVMe TLC ● 128 GB 2280 M2 SATA-3 Value PA ● 256 GB 2280 M2 PCIe 3x4SS NVMe TLC PA ● 512 GB 2280 M2 PCIe 3x4SS NVMe TLC PA Spare part number 827560-026 847109-002 847110-004 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Battery (see Battery on page 34) b. Optical drive (see Optical drive on page 35) c. Base enclosure (see Base enclosure on page 37) Remove the SSD: 1. Remove the Phillips M2.0 x 2.5 screw (1) that secures the SSD to the system board. 2. Remove the SSD (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the SSD. 42 Chapter 6 Removal and replacement procedures for authorized service provider parts