HP OMEN 17-w000 Maintenance & Service Guide: Models with GeForce GTX 1050/ - Page 52
the hard drive., Slide the two hard drive brackets
View all HP OMEN 17-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2. Lift the hard drive (2) up, and then slide the drive (3) forward to remove it from the computer. 3. If it is necessary to disassemble the hard drive, perform the following steps: a. Remove the hard drive cable connector (1) from the hard drive. b. Slide the two hard drive brackets (2) off the hard drive. To remove the second hard drive, follow these steps: 1. Open the zero insertion force (ZIF) connector to release the hard drive cable (1) from the system board. 2. Lift the hard drive (2) up. 40 Chapter 6 Removal and replacement procedures for authorized service provider parts
2.
Lift the hard drive
(2)
up, and then slide the drive
(3)
forward to remove it from the computer.
3.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the hard drive cable connector
(1)
from the hard drive.
b.
Slide the two hard drive brackets
(2)
off
the hard drive.
To remove the second hard drive, follow these steps:
1.
Open the zero insertion force (ZIF) connector to release the hard drive cable
(1)
from the system board.
2.
Lift the hard drive
(2)
up.
40
Chapter 6
Removal and replacement procedures for authorized service provider parts