HP OMEN 17-w000 Maintenance & Service Guide: Models with GeForce GTX 1050/ - Page 71
IMPORTANT, Using Setup Utility BIOS,
View all HP OMEN 17-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
2. Lift the USB board ribbon cable (1) to release it from the adhesive securing it to the computer. 3. Remove the Phillips M2.0 x 4.0 screw (2) securing the system board to the computer. 4. Lift the system board (3), and then remove it (4). Reverse this procedure to install the system board. IMPORTANT: After system board replacement, be sure to complete post-installation tasks as required that may include: ● Verifying functionality of the computer ● Updating the BIOS; see Using Setup Utility (BIOS) on page 74 Component replacement procedures 59
2.
Lift the USB board ribbon cable
(1)
to release it from the adhesive securing it to the computer.
3.
Remove the Phillips M2.0 x 4.0 screw
(2)
securing the system board to the computer.
4.
Lift the system board
(3)
, and then remove it
(4)
.
Reverse this procedure to install the system board.
IMPORTANT:
After system board replacement, be sure to complete post-installation tasks as required that
may include:
●
Verifying functionality of the computer
●
Updating the BIOS; see
Using Setup Utility (BIOS)
on page
74
Component replacement procedures
59