HP OfficeJet 250 User Guide - Page 59
Repeat steps 3 through 5 for the other cartridge if needed.
View all HP OfficeJet 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
2. Open the cartridge access door and wait for the print carriage to stop moving, which should take a few seconds. CAUTION: Do not replace or install cartridges when the print carriage is still moving. 3. Open the cartridge latch as shown and gently remove the cartridge from its slot. 4. Remove the protective film from a new cartridge. 5. Insert the new cartridge into its slot at the same angle at which you removed the old cartridge, and then close the latch as illustrated. Press the latch to make sure it is seated flat on the cartridge. NOTE: Install the color cartridge on the left and the black cartridge on the right. 6. Repeat steps 3 through 5 for the other cartridge if needed. 7. Close the cartridge access door. 8. Wait for the carriage to complete the cartridge initialization routine before using the printer. NOTE: Do not open the cartridge access door until the cartridge initialization is complete 48 Chapter 6 Work with cartridges ENWW