HP OmniBook xe3-gd HP Pavilion Notebook - Startup Guide - Page 36
Installing RAM modules - memory
View all HP OmniBook xe3-gd manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Configuring and Expanding Your Computer Installing RAM modules Installing RAM modules CAUTION The notebook provides an optional memory expansion slot for installing up to two RAM expansion modules. Use HP SDRAM modules only; EDO RAM is not supported. Replace the RAM module with one of the same speed or faster: a PC133 socket can use either a PC100 or a PC133 module, but a PC100 socket can use only a PC100 module. Both the module and the motherboard's socket are marked either "PC100" or "PC133". Your computer's computer chips are extremely static-sensitive. Static electricity can permanently damage computer chips. Carefully read the following caution information. Handle the RAM module only by its three nonconnector edges. Otherwise, you may damage the module due to electrostatic discharge. Static electricity can permanently damage computer chips. It is therefore important to discharge the static electricity from your body before touching or installing the memory module. Discharge your body's electricity by touching the metal shielding around the connectors on the rear of the computer. You'll need a small Phillips screwdriver to complete this procedure. 1. Click the Start Button and select Shut down. 2. Unplug the AC adapter and remove the battery. 36 Startup Guide