HP Pavilion 14-e000 HP Pavillion 14 Notebook PC Maintenance and Service Guide - Page 65
Power connector cable, Keyboard see
View all HP Pavilion 14-e000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5. Remove the TouchPad button board (4). Reverse this procedure to install the TouchPad button board. Power connector cable Description Power connector cable Spare part number 722907-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. Optical drive (see Optical drive on page 38) b. Hard drive (see Hard drive on page 40) c. Keyboard (see Keyboard on page 46) d. Top cover (see Top cover on page 49) Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Release the power connector cable from the clip (2) built into the base enclosure. Component replacement procedures 55