HP Pavilion 15-bk000 Maintenance and Service Guide - Page 41

Battery, the battery with double-sided adhesive.

Get HP Pavilion 15-bk000 PDF manuals and user guides View all HP Pavilion 15-bk000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Battery Description 3-cell, 48-WHr, 4.2-AHr, Li-ion battery (includes cable) Spare part number 796356-005 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 28). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Remove the four Phillips M2.5×4.4 screws (2) that secure the battery to the base enclosure. 3. Detach the card reader board cable (3) from the battery. (The card reader board cable is attached to the battery with double-sided adhesive.) 4. Use a case utility tool (4) or similar plastic, flat-edged tool to lift the right side of the battery until it rests at an angle. 5. Remove the battery (5) by sliding it up and to the right at an angle. Reverse this procedure to install the battery. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Battery
Description
Spare part number
3-cell, 48-WHr, 4.2-AHr, Li-ion battery (includes cable)
796356-005
Before removing the battery, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
28
).
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Remove the four Phillips M2.5×4.4 screws
(2)
that secure the battery to the base enclosure.
3.
Detach the card reader board cable
(3)
from the battery. (The card reader board cable is attached to
the battery with double-sided adhesive.)
4.
Use a case utility tool
(4)
or similar plastic,
flat-edged
tool to lift the right side of the battery until it
rests at an angle.
5.
Remove the battery
(5)
by sliding it up and to the right at an angle.
Reverse this procedure to install the battery.
Component replacement procedures
33