HP Pavilion 15-bk000 Maintenance and Service Guide - Page 56

Display assembly, Phillips PM2.5×4.4 screws

Get HP Pavilion 15-bk000 PDF manuals and user guides View all HP Pavilion 15-bk000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

4. Remove the memory module (2) by pulling it away from the slot at an angle. Reverse this procedure to install a memory module. Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Keyboard/top cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 33). 6. Disconnect the WLAN module antenna cables from the WLAN module (see WLAN module on page 37). 7. Remove the system board (see System board on page 40). Remove the display assembly: 1. Remove the five Phillips PM2.5×4.4 screws (1) and the Phillips PM2.0×3.3 screw (2) that secure the display assembly to the base enclosure. 48 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
4.
Remove the memory module
(2)
by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
Display assembly
NOTE:
The display assembly is spared at the subcomponent level only. For display assembly spare part
information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
Keyboard/top cover
on page
28
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
33
).
6.
Disconnect the WLAN module antenna cables from the WLAN module (see
WLAN module
on page
37
).
7.
Remove the system board (see
System board
on page
40
).
Remove the display assembly:
1.
Remove the
five
Phillips PM2.5×4.4 screws
(1)
and the Phillips PM2.0×3.3 screw
(2)
that secure
the display assembly to the base enclosure.
48
Chapter 5
Removal and replacement procedures