HP Pavilion 15-bk000 Maintenance and Service Guide - Page 66

Power connector cable, that secures the power connector cable and bracket

Get HP Pavilion 15-bk000 PDF manuals and user guides View all HP Pavilion 15-bk000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Power connector cable Description Power connector cable Spare part number 807522-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Keyboard/top cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 33). 6. Disconnect the WLAN module antenna cables from the WLAN module (see WLAN module on page 37). 7. Remove the system board (see System board on page 40). 8. Remove the display assembly (see Display assembly on page 48). Remove the power connector cable: 1. Remove the Phillips PM2.0×2.3 screw (1) that secures the power connector cable and bracket to the base enclosure. 2. Remove the power connector cable bracket (2) by lifting it up, and then sliding it to the left. 3. Remove the power connector cable (3) by sliding it to the left. Reverse this procedure to install the power connector cable. 58 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Power connector cable
Description
Spare part number
Power connector cable
807522-001
Before removing the power connector cable, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
Keyboard/top cover
on page
28
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
33
).
6.
Disconnect the WLAN module antenna cables from the WLAN module (see
WLAN module
on page
37
).
7.
Remove the system board (see
System board
on page
40
).
8.
Remove the display assembly (see
Display assembly
on page
48
).
Remove the power connector cable:
1.
Remove the Phillips PM2.0×2.3 screw
(1)
that secures the power connector cable and bracket to
the base enclosure.
2.
Remove the power connector cable bracket
(2)
by lifting it up, and then sliding it to the left.
3.
Remove the power connector cable
(3)
by sliding it to the left.
Reverse this procedure to install the power connector cable.
58
Chapter 5
Removal and replacement procedures