HP Pavilion 15-bk000 Maintenance and Service Guide - Page 47

Connector board, Detach the connector board cable

Get HP Pavilion 15-bk000 PDF manuals and user guides View all HP Pavilion 15-bk000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Connector board Description Connector board (includes cable, memory card reader, USB port, and double-sided adhesive) Spare part number 807527-001 Before removing the connector board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Keyboard/top cover on page 28). 5. Remove the base enclosure (see Keyboard/top cover on page 28). 6. Disconnect the battery cable from the system board (see Battery on page 33). Remove the connector board: 1. Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect the connector board cable from the system board. 2. Detach the connector board cable (2) from the battery. (The connector board cable is attached to the battery with double-sided adhesive.) 3. Remove the two Phillips PM2.0×3.3 screws (3) that secure the connector board to the base enclosure. 4. Remove the connector board (4). Reverse this procedure to install the connector board. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Connector board
Description
Spare part number
Connector board (includes cable, memory card reader, USB port, and double-sided adhesive)
807527-001
Before removing the connector board, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
Keyboard/top cover
on page
28
).
5.
Remove the base enclosure (see
Keyboard/top cover
on page
28
).
6.
Disconnect the battery cable from the system board (see
Battery
on page
33
).
Remove the connector board:
1.
Release the ZIF connector
(1)
to which the connector board cable is connected, and then disconnect
the connector board cable from the system board.
2.
Detach the connector board cable
(2)
from the battery. (The connector board cable is attached to
the battery with double-sided adhesive.)
3.
Remove the two Phillips PM2.0×3.3 screws
(3)
that secure the connector board to the base enclosure.
4.
Remove the connector board
(4)
.
Reverse this procedure to install the connector board.
Component replacement procedures
39