HP Pavilion 17-e100 Pavilion 17 TouchSmart Notebook PC Pavilion 17 Notebook PC - Page 60
Remove the hard drive, Remove the four Phillips PM2.5×3.25 screws
View all HP Pavilion 17-e100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Remove the hard drive: 1. Remove the two Phillips PM2.5×5.75 screws (1) that secure the hard drive to the computer. 2. Disconnect the hard drive connector cable (2) from the system board. 3. Lift up on the hard drive tab (1) to release the hard drive from the hard drive bay. 4. Remove the hard drive (2). 5. If it is necessary to disassemble the hard drive, perform the following steps: a. Position the hard drive with the connector toward you. b. Disconnect the hard drive connector cable (1) from the hard drive. c. Remove the four Phillips PM2.5×3.25 screws (2) that secure the hard drive bracket to the hard drive. d. Remove the hard drive bracket (3) from the hard drive. The hard drive bracket, hard drive connector cable, and screws are available in the Hard Drive Hardware Kit, spare part number 716179-001. 50 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts