HP Pavilion 17-e100 Pavilion 17 TouchSmart Notebook PC Pavilion 17 Notebook PC - Page 75
Display assembly, Keyboard see
View all HP Pavilion 17-e100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Display assembly NOTE: The HP Pavilion 17 TouchSmart Notebook models are spared at the display assembly only. For removal procedures for the HP Pavilion 17 Notebook non-touch screen models display assembly subcomponents, see Display assembly subcomponents on page 67. Component Spare part number 17.3 in (43.94 cm) display assembly, HD+, WLED, BrightView, AG, SVA, LED TouchSmart display assembly for HP Pavilion 17 TouchSmart Notebook models (includes webcam/ microphone module and wireless antenna cables) 749970-001 To remove the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47), and then remove the following components: a. Optical drive (see Optical drive on page 48) b. Hard drive (see Hard drive on page 49) c. WLAN module (see WLAN module on page 52) d. Keyboard (see Keyboard on page 56) e. Top cover (see Top cover on page 60) Remove the display assembly: 1. Disconnect the display panel cable (1) from the system board. 2. Release the display panel cable from the clips built into the base enclosure (2). Component replacement procedures 65