HP Pavilion dv5-2100 HP Pavilion dv5 Entertainment PC - Maintenance and Servic - Page 86
System board
View all HP Pavilion dv5-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Remove the power connector cable: 1. Disconnect the power cable (1) from the system board. 2. Remove the power connector (2) from the alignment clip built into the base enclosure. 3. Remove the power connector cable Reverse this procedure to install the USB board. System board NOTE: The system board spare part kit includes replacement thermal material. Description For use on computer models equipped with an AMD processor (includes graphics subsystem with UMA memory) For use on computer models equipped with an Intel processor (includes graphics subsystem with discrete memory) Spare part number 598225-001 607605-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49), and then remove the following components: a. Memory module/wireless module compartment cover (see Memory module on page 50) b. Hard drive (see Hard drive on page 58) 76 Chapter 4 Removal and replacement procedures