HP Pavilion dv5-2100 HP Pavilion dv5 Entertainment PC - Maintenance and Servic - Page 89
it rests at an angle., Use the front/right corner of the system board
View all HP Pavilion dv5-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3. Disconnect the following cables from the system board: (1) Optical drive connector board cable (2) USB board cable (3) Power cable 4. Remove the two Phillips PM2.5×7.0 screws (1) that secure the system board to the base enclosure. 5. Use the front/right corner of the system board (2) to lift the right side of the system board (3) until it rests at an angle. 6. Remove the system board (4) by sliding it up and to the right at an angle. Component replacement procedures 79
3.
Disconnect the following cables from the system board:
(1)
Optical drive connector board cable
(2)
USB board cable
(3)
Power cable
4.
Remove the two Phillips PM2.5×7.0 screws
(1)
that secure the system board to the base
enclosure.
5.
Use the front/right corner of the system board
(2)
to lift the right side of the system board
(3)
until
it rests at an angle.
6.
Remove the system board
(4)
by sliding it up and to the right at an angle.
Component replacement procedures
79