HP Pavilion dv6-3100 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 84
Power connector cable, built into the base enclosure.
View all HP Pavilion dv6-3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Power connector cable Description Power connector cable Spare part number 603692-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: a. Accessory cover (see Hard drive on page 44) b. Keyboard (see Keyboard on page 53) c. Top cover (see Top cover on page 56) d. Display assembly (see Display assembly on page 65) Remove the power connector cable: 1. Disconnect the power cable (1) from the system board. 2. Release the power cable from the clips (2) built into the base enclosure. 3. Remove the Phillips PM2.5×4.0 screw (3) that secures the power connector to the base enclosure. 4. Remove the power connector bracket (4) The power connector bracket is included with the base enclosure spare part kit, spare part number 603689-001. 74 Chapter 4 Removal and replacement procedures