HP Pavilion dv6-3100 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 98
the base enclosure., Remove the optical drive connector board
View all HP Pavilion dv6-3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Remove the optical drive connector board: 1. Release the optical drive connector board cable from the clips (1) built into the base enclosure. 2. Remove the two Phillips PM2.5×6.0 screws (2) that secure the optical drive connector board to the base enclosure. 3. Remove the optical drive connector board (3). Reverse this procedure to install the optical drive connector board. 88 Chapter 4 Removal and replacement procedures
Remove the optical drive connector board:
1.
Release the optical drive connector board cable from the clips
(1)
built into the base enclosure.
2.
Remove the two Phillips PM2.5×6.0 screws
(2)
that secure the optical drive connector board to
the base enclosure.
3.
Remove the optical drive connector board
(3)
.
Reverse this procedure to install the optical drive connector board.
88
Chapter 4
Removal and replacement procedures