HP Pavilion g7 HP Pavilion g7 Notebook PC - Maintenance and Service Guide - Page 71
TouchPad LED board, and then remove the following components
View all HP Pavilion g7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
5. Lift the rear edge of the TouchPad button board (6) until it is released from the clips built into the top cover. 6. Remove the TouchPad button board and cable. Reverse this procedure to install the TouchPad button board and cable. TouchPad LED board Description TouchPad LED board (includes cable) Spare part number 640213-001 Before removing the TouchPad LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44), and then remove the following components: ● Optical drive (see Optical drive on page 45) ● Hard drive (see Hard drive on page 47) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 57) Component replacement procedures 63