HP Pavilion g7 HP Pavilion g7 Notebook PC - Maintenance and Service Guide - Page 99

If it is necessary to replace the webcam/microphone module, Remove the display bezel

Get HP Pavilion g7 PDF manuals and user guides View all HP Pavilion g7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

5. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Remove the two Mylar screw covers (1) and the two Phillips PM2.5×6.0 screws (2) that secure the display bezel to the display assembly. The Mylar screw covers are available in the Display Screw Kit, spare part number 640218-001. b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel (4). The display bezel is available using spare part number 640204-001. 6. If it is necessary to replace the webcam/microphone module: a. Detach and release the webcam/microphone module (1) as far as the webcam/microphone module cable allows. (The webcam/microphone module is attached to the display enclosure with double-sided tape.) Component replacement procedures 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two Mylar screw covers
(1)
and the two Phillips PM2.5×6.0 screws
(2)
that
secure the display bezel to the display assembly. The Mylar screw covers are available in the
Display Screw Kit, spare part number 640218-001.
b.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the bottom
edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(4)
. The display bezel is available using spare part number
640204-001.
6.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module
(1)
as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
Component replacement procedures
91