HP Pavilion g7 HP Pavilion g7 Notebook PC - Maintenance and Service Guide - Page 85
Optical drive cable, System board see
View all HP Pavilion g7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Reverse this procedure to install the system board. Optical drive cable NOTE: The optical drive cable is included in the Cable Kit, spare part number 640206-001. The optical drive cable includes the optical drive connector. Before removing the optical drive cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44), and then remove the following components: ● Optical drive (see Optical drive on page 45) ● Hard drive (see Hard drive on page 47) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 57) ● System board (see System board on page 73) Remove the optical drive cable: 1. Release the optical drive cable (1) from the clips (2) built into the base enclosure. Component replacement procedures 77