HP Presario 1600 Presario 1600XL Series Maintenance and Service Guide - Page 75
Removing the Battery Charger Board
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Presario 1600 Series Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143, 1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150 Before You Begin Specifications Removal Sequence Product Description Battery Operations Troubleshooting Parts Catalog Pin Assignments MSG Index Removal Sequence Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly QuikDock Battery Pack Palmrest Cover with TouchPad Keyboard Status/Internet Zone Cover Internet Button Board Heatspreader Modem Hard Drive DisqPlay Module Processor CD or DVD Drive Display Panel Assembly Upper CPU Cover Fan Assembly RTC Battery Diskette Drive Battery Charger Board Speaker Assembly System Board Memory Module Removal Sequence Removing the Battery Charger Board (Voltage Converter Board) To remove the battery charger board, complete the following: 1. Prepare the computer for disassembly. 2. Remove the Palmrest Cover with TouchPad. 3. Remove the keyboard. 4. Remove the Heatspreader. 5. Remove the Status/Internet Zone Cover. 6. Remove the Internet Button board. 7. Remove the display panel Assembly. 8. Remove the hard drive. 9. Remove the upper CPU cover. 10. Remove two screws from the battery charger board, unplug the board from the connector on the system board, and lift battery charger board out of the chassis. To replace the battery charger board, reverse the previous procedures. When replacing the battery NOTE: charger board, ensure that pins are aligned with the the connector on the system board.