HP Presario 1600 Presario 1600XL Series Maintenance and Service Guide - Page 86

Power-On Self Test POST - ram

Page 86 highlights

Presario 1600 Series PresModels: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143, 1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150 Before You Begin Product Description Parts Catalog Specifications Battery Operations Pin Assignments Removal Sequence Troubleshooting MSG Index Preliminary Steps Clearing the Power-On Password Power-On Self Test (POST) Compaq Diagnostics Diagnostic Error Codes Troubleshooting Without Diagnostics Solving Minor Problems Contacting Compaq Support Troubleshooting Power-On Self Test (POST) To run POST, complete these steps: Turn off the computer, then turn on the computer. As soon as the Compaq logo appears press the ESC key to clear the logo and display the POST messages as they occur. If POST does not detect any errors, the computer will not beep. This indicates successful completion of the POST test. POST has run successfully and boots from the hard drive (or from a bootable diskette if one is installed in the diskette drive). If POST detects errors, the errors are indicated by screen and/or audible messages. A list of the POST error codes and their descriptions are shown in the table below. If the system is not functioning well enough to run POST, or if the display is NOTE: not functioning well enough to show POST error messages, refer to the Troubleshooting tables. Power-On Self-Test Messages 102-System Board Failure Probable Cause Recommended Action DMA, timers, etc. Replace the system board. 162-System Options Not Set Probable Cause Configuration incorrect CMOS reflects that an invalid configuration has been set. RAM failure Recommended Action Run Computer Setup. Run Computer Setup. 1. Replace the memory modules. 2. Replace the system board. Memory test data error 1. Replace the memory modules. 2. Replace the system board. XX000YZZ RAM Replace the system failure board. XX000YZZ 201-Memory Error Probable Cause Recommended Action 1. Replace the memory modules. 2. Replace the system board. 301-Keyboard Error Probable Cause Recommended Action Keyboard failure 1. Ensure the keys are not depressed during POST. 2. Reconnect the keyboard with the computer off. 3. Replace the keyboard. 304-Keyboard or System Unit Error Probable Cause Keyboard or system board error Recommended Action 1. Replace the keyboard. 2. Replace the TouchPad or mouse. 3. Replace the system board. 601-Diskette Controller Error Probable Cause Mismatch in drive type or failure in the diskette controller Recommended Action 1. Run Computer Checkup (TEST). 2. Check and/or replace cables. 3. Replace the system board. 605-Diskette Drive Error Probable Cause Recommended Action Mismatch in drive type Run Computer Setup. 1780-Primary Hard Drive 0 Failure Probable Cause Disk 0 failed to respond Recommended Action 1. Run Computer Checkup (TEST). 2. Replace the hard drive. Hard drive format error 1. Run Computer Checkup (TEST). 2. Replace the hard drive. 1782-Hard Drive Controller Probable Cause Recommended Action Hard drive 1. Run Computer controller failure Setup. 2. Replace the hard drive. Top of Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

Presario 1600 Series
Pres
Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin
Product Description
Parts Catalog
Specifications
Battery Operations
Pin Assignments
Removal Sequence
Troubleshooting
MSG Index
Preliminary
Steps
Clearing the
Power-On
Password
Power-On Self
Test (POST)
Compaq
Diagnostics
Diagnostic
Error Codes
Troubleshooting
Without
Diagnostics
Solving Minor
Problems
Contacting
Compaq
Support
Troubleshooting
Power-On Self Test (POST)
To run POST, complete these steps:
Turn off the computer, then turn on the
computer. As soon as the Compaq logo
appears press the
ESC
key to clear the
logo and display the POST messages as
they occur.
If POST does not detect any errors, the
computer will not beep. This indicates
successful completion of the POST test.
POST has run successfully and boots
from the hard drive (or from a bootable
diskette if one is installed in the diskette
drive).
If POST detects errors, the errors are
indicated by screen and/or audible
messages. A list of the POST error codes
and their descriptions are shown in the
table below.
NOTE:
If the system is not
functioning well
enough to run POST,
or if the display is
not functioning well
enough to show
POST error
messages, refer to
the Troubleshooting
tables.
Power-On Self-Test Messages
102-System Board Failure
Probable
Cause
Recommended
Action
DMA, timers,
etc.
Replace the system
board.
162-System Options Not Set
Probable
Cause
Recommended
Action
Configuration
incorrect
Run Computer Setup.
CMOS reflects
that an invalid
configuration
has been set.
Run Computer Setup.
RAM failure
1.
Replace the
memory modules.
2.
Replace the
system board.
Memory test
data error
1.
Replace the
memory modules.
2.
Replace the
system board.
XX000YZZ RAM
failure
Replace the system
board.
XX000YZZ 201-Memory Error
Probable
Cause
Recommended
Action
1.
Replace the
memory modules.
2.
Replace the
system board.
301-Keyboard Error
Probable
Cause
Recommended
Action
Keyboard failure
1.
Ensure the keys
are not depressed
during POST.
2.
Reconnect the
keyboard with the
computer off.
3.
Replace the
keyboard.
304-Keyboard or System Unit Error
Probable
Cause
Recommended
Action
Keyboard or
system board
error
1.
Replace the
keyboard.
2.
Replace the
TouchPad or
mouse.
3.
Replace the
system board.
601-Diskette Controller Error
Probable
Cause
Recommended
Action
Mismatch in
drive type or
failure in the
diskette
controller
1.
Run Computer
Checkup (TEST).
2.
Check and/or
replace cables.
3.
Replace the
system board.
605-Diskette Drive Error
Probable
Cause
Recommended
Action
Mismatch in
drive type
Run Computer Setup.
1780-Primary Hard Drive 0 Failure
Probable
Cause
Recommended
Action
Disk 0 failed to
respond
1.
Run Computer
Checkup (TEST).
2.
Replace the hard
drive.
Hard drive
format error
1.
Run Computer
Checkup (TEST).
2.
Replace the hard
drive.
1782-Hard Drive Controller
Probable
Cause
Recommended
Action
Hard drive
controller failure
1.
Run Computer
Setup.
2.
Replace the hard
drive.
Top of Page