HP Presario 1600 Presario 1600XL Series Maintenance and Service Guide - Page 85
Clearing the Power-On Password
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Presario 1600 Series Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143, 1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150 Before You Begin Specifications Removal Sequence Product Description Battery Operations Troubleshooting Parts Catalog Pin Assignments MSG Index Preliminary Steps Clearing the Power-On Password Power-On Self Test (POST) Compaq Diagnostics Diagnostic Error Codes Troubleshooting Without Diagnostics Solving Minor Problems Contacting Compaq Support Troubleshooting Clearing the Power-On Password Clearing the power-on password also NOTE: removes all Setup attributes that are programmed in the CMOS. If the password is not known, clear it by performing the following steps: 1. Turn off the computer. 2. Disconnect the power cord. 3. Remove the battery pack. 4. Remove the Palmrest Cover with TouchPad. 5. Remove the keyboard. 6. Remove the Heatspreader. 7. Remove the RTC battery for about 30 seconds to ensure that the password is cleared. (The RTC battery is located underneath the heatspreader and next to the CD/DVD connector.) Not shown in illustration. 8. Reassemble the computer. 9. Turn on the computer to verify that the power-on password has been cleared. If it has not been cleared, repeat steps 1 through 9.