HP Presario CQ43-300 Compaq Presario CQ43 Notebook PC Maintenance and Service - Page 54
Hard drive, Remove the battery see
View all HP Presario CQ43-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive connector cable, bracket, or screws. The hard drive connector cable is included in the Cable Kit, spare part number 645968-001. The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number 646969-001. Description For use with all computer models: 500-GB, 5400-rpm 250-GB, 5400-rpm 250-GB, 5400-rpm For use only with computer models equipped with an Intel processor: 320-GB, 5400-rpm Spare part number 634932-001 645191-001 622641-001 622643-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 42). Remove the hard drive: 1. Loosen the captive screw (1) that secures the hard drive compartment cover to the computer. 46 Chapter 4 Removal and replacement procedures