HP Presario CQ43-300 Compaq Presario CQ43 Notebook PC Maintenance and Service - Page 73
that secure the power connector and bracket to, Remove the two Phillips PM2.5×5.0 screws
View all HP Presario CQ43-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4. Release the power connector cable from the clip (2) built into the base enclosure. 5. Turn the computer right-side up, with the front toward you. 6. Open the computer. 7. Release the power connector cable (1) from the clips and routing channel built into the base enclosure. 8. Remove the two Phillips PM2.5×5.0 screws (2) that secure the power connector and bracket to the computer. 9. Remove the power connector bracket (3). Component replacement procedures 65
4.
Release the power connector cable from the clip
(2)
built into the base enclosure.
5.
Turn the computer right-side up, with the front toward you.
6.
Open the computer.
7.
Release the power connector cable
(1)
from the clips and routing channel built into the
base enclosure.
8.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the power connector and bracket to
the computer.
9.
Remove the power connector bracket
(3)
.
Component replacement procedures
65