HP Presario CQ43-300 Compaq Presario CQ43 Notebook PC Maintenance and Service - Page 95
The gold triangle, Lift the processor
View all HP Presario CQ43-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
● Display assembly (see Display assembly on page 66) ● System board (see System board on page 73) ● Fan/heat sink assembly (see Fan/heat sink assembly on page 80) Remove the processor: 1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn counterclockwise (1), until you hear a click. 2. Lift the processor (2) straight up, and then remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. Component replacement procedures 87
●
Display assembly (see
Display assembly
on page
66
)
●
System board (see
System board
on page
73
)
●
Fan/heat sink assembly (see
Fan/heat sink assembly
on page
80
)
Remove the processor:
1.
Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise
(1)
, until you hear a click.
2.
Lift the processor
(2)
straight up, and then remove it.
NOTE:
The gold triangle
(3)
on the processor must be aligned with the triangle icon
(4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Component replacement procedures
87