HP Presario CQ43-300 Compaq Presario CQ43 Notebook PC Maintenance and Service - Page 72
Power connector cable, Remove the power connector cable
View all HP Presario CQ43-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Reverse this procedure to install the USB board. Power connector cable Description Power connector cable Spare part number 641394-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41), and then remove the following components: ● Memory module/wireless module compartment cover (see WLAN module on page 42) ● Hard drive (see Hard drive on page 46) ● Keyboard (see Keyboard on page 51) ● Top cover (see Top cover on page 54) ● Speakers (see Speakers on page 61) ● USB board (see USB board on page 63) Remove the power connector cable: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Disconnect the power connector cable (1) from the system board. 64 Chapter 4 Removal and replacement procedures