HP Presario X1200 HP and Compaq Notebook PC Series - Maintenance and Service G - Page 122
Route the two antenna cables, out of the hole in the system
View all HP Presario X1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Removal and Replacement Procedures 6. Turn the notebook right-side up with the rear panel facing you. 7. Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board. 8. Route the two antenna cables 3 out of the hole in the system board. Disconnecting the TouchPad Cable and Routing the Wireless Antenna Cables 5-32 Maintenance and Service Guide
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
6. Turn the notebook right-side up with the rear panel
facing you.
7. Release the ZIF connector
1
to which the TouchPad cable
is attached and disconnect the TouchPad cable
2
from the
system board.
8. Route the two antenna cables
3
out of the hole in the system
board.
Disconnecting the TouchPad Cable and Routing the Wireless
Antenna Cables